Showing posts with label thegns. Show all posts
Showing posts with label thegns. Show all posts

Thursday, 5 July 2012

Wargames Factory Saxon Thegns- unboxing, review and sprue inspection


This review is for the Wargames Factory Saxon Thegns set


You get 32 multipart, highly detailed figures for your money. And tbh these aren't ever very expensive. I got mine through Famous Gaming , they may still have some in stock I'm not sure.

They glue together easily and look great. The scale is just right & mixes well with other ranges. The detailing is spot on and easy to paint even for someone with two left hands, like me.

I've used this kit before and found it to be great so I got another, lets look inside.

You get 8 of the body sprues and 4 of the characteristics sprues, and they all stack neatly, hurrah!




The torsos and legs come joined in 4 different poses. That doesn't sound a lot seeing as there's 32 of them but with a bit of ingenuity you can arrange them in a rank and you'll never even notice. The torsos come in chainmail with great detailing. The heads go on into sockets in the traditional way, allowing for a great range of movement, although a few do require a bit of trimming along the neck to sit well.

There are a tonne of arms to allow you to pose your men however you want, some are even included to be used as archers in action poses. Nice to have that for a change. The arms are chainmail to the bicep and then cloth the rest of the way. Great detailing.

The body+legs and arm sprues are the same between this box and the viking huscarls box. 
Wargames factory have made it so there are 2 pairs of body/leg/arm sprues- one for armoured (the one above) and one for unarmoured (not in this post).

 The way you distinguish between the armies is by use of their special army sprues, as shown below!

saxon sprue from both sides
left hand sprue                right hand sprue 

So on this sprue you get all the heads, shields, weapons and special bits you need to make your miniatures into Saxons.  NB: This same sprue comes with armoured and unarmoured Saxons!

Theres a mixture of armoured and unarmoured heads- most are unarmoured. There are slouch caps to give that authentic continental warrior look- I found they look great on skirmishers.
You also get a mixture of three types of shield- there is the flat round shield, the domed round shield and the kite shield. The kite shield is a nice touch and could allow you to create a few Norman looking foot soldiers if you needed.

In the bottom right of the left hand sprue, just below the shield is a pair of arms to be used to hold either a dragon banner or a two handed axe. This great feature saves you from so much fiddly glueing, lifesaver. You also get a pair of bows, spears, a horn, dragon banner, some quivers and a selection of weapons.

They don't come with bases but for their price it's no biggie to go and buy bases separately. If buying online I recommend Famous Gaming for cheap renedra bases.

Detailing & sculpting: 8/10- barely any mould lines, good detailing, poses are ok but could be more dynamic and hair could have more texture to it.
Scaling: 9/10- scale well with most other 28mm ranges, could be slighty chunkier but overall good.
Amount of bits: 9/10- loads of bits, spare heads and BOWS which are really appreciated. 28mm plastic bows are golddust.
Ease of construction: 10/10- incredibly easy to build. Having joined legs and torsos was handy.
Value for money: 9/10- the boxes dont cost the earth and for your money you get enough to start a saga warband or have a chunky regiment for wab/ fog

Over all: 45/50 - a mighty fine score!


All in all a nice kit packed with great miniatures and that will give you a few spare parts to add to a bits box when you're done.

To see how they scale up with other manufactures of 28mm dark ages check my other posts!

Wednesday, 4 July 2012

Gripping Beast Plastics Saxon Thegns- unboxing, review and sprue inspection

This review is for the Saxon Thegns kit

This is the first time I've seen inside the new Gripping Beast Plastics boxes. I've liked their metal models for a long time but these new figures a bit of an unknown entity so I wasn't sure what to expect.

Saxon Thegns box cover


Luckily, in no way did they disappoint!

You get 44 plastic figures in the box, FORTY FOUR.

 That's enough to give a GW CEO a heart-attack.

They're spread over 4 standard sprues and 2 command sprues. Let's take a look.


Saxon Thegns Sprue

You get a tonne of stuff with these kits. The Saxon kit doesn't have quite as much as the Viking one, but you do get a lot more spears, which makes them perfect for shieldwall arrangements.

The bodies and weapons are a bit bigger than most other 28mm scale figs but its a minute difference that is within the realms of possibility. In the real world everyone is a different height and weapons are all different sizes,  that's part of realistic gaming, so I welcome the difference. Check one of my previous posts for a scale comparison of these against other figs.


Saxon thegn sprue flipped

All torsos have crucifix necklaces.


Saxon sprue on the left and Viking sprue on the right- can you spot the differences?


Saxon and Viking side by side flipped. Notice the Vikings have much more in the way of axes and swords whereas the Saxons have majority spears. Helmets are also very different.


Same shields as the Viking set- round with bossed centres. Shame there's no kite shields included but not the end of the world.

 The heads are glued on to a flat plateau neck with the join just above the Adam's apple. This makes a really solid and easy joint without any faff trying to get the heads to fit in place. It does unfortunately also make it hard to mix these torsos with other model ranges but theres enough heads in here to have plenty of options so I wasn't fussed. 

Torsos and leg are joined but are in a range of 5 poses so they don't look too static when ranked up.

 They're also in the perfect positions to form a shieldwall- a major bonus over warlord games ad wargames factory whose figures are in more combat based poses.


Command Sprue

The command sprue contains two figures, a fabric cloak, horn, dragon standard, cool heads and some swords.

The kit also includes bases! Definite tick for that! Theres a nice selection too, theres 20mm and 40mm squares and then 100  x 20 , 60 x 20 and 40 x 20 strips. So no matter how you want to base them you're covered.



Detailing & sculpting: 8/10- few mouldlines in places but over all really good and easily trimmed, great detailing on all hair, beards etc, weapons look great and chainmail is spot on.
Scaling: 8/10- Bit chunkier than most other brands but mix in ok. Weapons are slightly chnkier than wargames factory but can still be mixed.
Amount of bits: 10/10- an insane amount of bits! check the pics- you get a tonne of stuff!
Ease of construction: 10/10- incredibly easy to build. Having joined legs and torsos was handy, and arms go on easily. Neck joined heads are easy and still allow for posing.
Value for money: 9/10- bit pricey compared to other sets but youre getting 44 men- thats a saga warband or for wab/fog either one massive regiment or two regular regiments. Awesome.

Over all: 45/50 - a mighty fine score!



So for your money you're essentially getting two regiments or one huge one if you play WAB, or a whole warband if you're playing SAGA. Plus a tonne of stuff for a bits box. AND bases included. The models themselves are of a very high quality, with excellent sculpting and manufacturing. They barely needed trimming before being built, hardly any mould lines at all!


Great kit!

To see how they scale up with other manufactures of 28mm dark ages check my other posts!




Scale comparison for Dark Ages 28mm plastic miniatures!

The postman delivered a tonne of things I'd ordered through my bro over at Famous-Gaming today. 

Pretty exciting haul!



I'll go through the sprues in detail in seperate posts. There's figures from Gripping Beast, Warlord Games, Wargames Factory and Conquest Games. The bases are all renedra and the spray paint is army painter matt black.

These figs are almost all boxes I've used previously so I can demo scale for these easily.


These are the bases i use on my figs. Theyre made by Renedra and are the 100x20mm strips, the 20mm squares and the 25mm round. I got mine through Famous Gaming- they're cheap and will always combine postage! 




I also picked up these basing products from Famous-Gaming. Nice and wintery and cheap too!


These weren't from Famous but I'd like to highlight the products. I have used Revell Contacta glue for ages but recently ran out. I went to my local hobby store to get some more and they didn't sell it, but said the Humbrol liquid poly was the same. MY ARSE IS IT. Its as runny as water, the brush always falls out the lid and when unscrewing it tends to go everywhere. Well unimpressed! Stick with Revell, GW or what you know best!


Great spray- much better than GW- cheap, no loss of detail and easy coating.


Also Lidl stocks this, winner.


Okay on with the scale comparisons!

All these products were sold as 28mm, but as with all scale models that doesn't necessarily mean they are all to scale with eachother. They're close but its not an exact science and each brand has slight variations. 
So heres my first rank of men we'll be looking at. We have from left to right:
warlord games celt, wargames factory viking with germanic celt head, warlord games celt, wargames factory saxon, warlord games celt.


As you can see they match up perfectly. There are minor differences between the scales of weapons but as you can see they are interchangeable between the ranges without it looking odd. Shields are also a total free for all.


Heres the same rank with the addition of a Games Workshop Warrior of Rohan. Hes on a much thicker base and still stands a head below the warlord games celt. A few people out there say Rohhirrim make great figs for 28mm saxons. Maybe- if you have a gap in a rank to fill and they're all you have to hand but to be honest they'd look like shortarses compared to any army they faced so I wouldnt be keen. Ive got one or two amongst my army just to stop me losing them but, yeah, regiments of them look tiny. May work better as larger 25mm saxons but I think GW have intentionally made them difficult to scale up against other ranges.

So heres ranking number 2. Here we have:
A gripping beast plastics saxon, wargames factory viking, gripping beast hearthguard, wargames factory saxon/ viking mix, gripping beast plastic viking, warrior of rohan, wargames factory viking.


As you can see all scale up well together, minus the rohan guy who once again looks too small to come and play war. The GBP guys are a bit on the chunky side but make great hearthguard or character bodyguards if fielded en masse or when mixed into mixed ranks just look like slightly taller and burlier men. The GBP do have thicker weapons than warlord and wargames factory but they are still largely interchangeable and work well side by side. So thats 3 providers that all work well together, result.




Close ups on the rank above, in different configuration. Can you see what I mean about the chunkier GBP figs. I think they still look fine though, especially as so many are squatting to create a shieldwall.


Comparison with some warhammer fantasy empire- empire are quite a bit larger than everything, except perhaps the GBP saxon next to the priest. I may base up a saxon on a fantasy base and see how they compare to the empire free companies- could be a cheap way of building up a WFB Norse army!

People compare these and say they are interchangeable- I', afraid to say I cant agree purely on scale. Deatiling for both are great but the GBP is like a giant compared to a Rohirrim.

Another rank, yes i made a booboo and used the same head twice! GBP ranks up fine with warlord games figures as you can see. A more dynamic pose may have done him more justice but thats all i have for now.


The first 2 units painted!

Bowmen are a combo of wargames factory celts, ancient germans and viking bondi while the armoured infantry are a combo of wargames factory viking huscarls, saxon thegns and ancient germans, and warlord games ancient celts. 

Hope this was useful, please feel free to ask any questions or make comments or suggestions. 

Unboxing and sprue review for the above boxed products to follow!

Building a Viking / Saxon Grainstore for 28mm Dark Ages Wargaming


This tutorial is how to make a Scandinavian grainstore- perfect for Vikings or Saxons!

The methods used on this build are very similar to previous builds so check them out for a more detailed explanation of certain techniques.

Basing materials supplied by Famous Gaming, check them out!

Part 1: Materials- Some foamboard, some plastic chopsticks, a craft knife, hot glue gun, ruler and pencil. A sheet of foamboard about A4 size should suffice, I used scraps but you'd have leftovers if you bought an A4 sheet from a shop.

The foamboard was cut to give a bevelled base and the 4 walls of the building

2 triangles were cut to be the triangular gable ends


This was all glued together and a floor was added- the floor on this build is 100% necessary!


I then cut a door from the odd shape left from cutting the two triangles and glued this on. Then I built a frame around the door and a ledge, using the rectangular chopstick ends. I also started to glue the upright chopsticks in place. These were cut into to give a rougher hewn appearance, see my older posts for more on this :)

This continued all the way around the building.

I then paired up 10 of the rectangular ends and glued them to the base. These provide the stilts that the building will stand on.




Tadah! I didnt glue the building on top so it is able to be moved for storage etc. Two beams were added to the roof for extra support and to look fancy. Coming along nicely.


The roof was made from strips of scouring pad cut and overlaid. Rough them up for a more authentic thatch look.

Splitting the pads will make the thatch much more realistic and also make it go much further. This isn't the building in the tutorial but around now was when my camera decided to hate life so there's a bit of a  jump.


After this point more steps were added using the rectangular ends and a chopstick beam frame was added under the building to stop it sliding when placed on the stilts.  Then it got undercoated in black spray paint 


The whole thing got painted in burnt umber brown acrylic paint- few coats for the chopsticks and light coats for the roof.


The roof then got further coats of country maple acrylic to add some highlights.


It then got a pretty thick brushing of golden brown acrylic- but not completely covering the previous 2 brown layers.


To finish it off the roof got a final highlight of tan acrylic paint, its a sandy colour that works well with the golden brown to create a thatched look.


The base was painted in a similar way- sprayed black, painted with burnt umber, dry brushed with country maple and tan.


As the pic above shows it works out nicely for scale and is a pretty unusual model- not many people seem to make grainstores for their 28mm. All in all very happy with this build :)

Any suggestions, questions or comments ask away!







Monday, 11 June 2012

My Dark Ages army at the moment!


So this is my Dark Ages 28mm army as it stands today- 

I'm reluctant to decide upon which army they are just yet- they are looking to be either Kent or Wessex English Saxons or Danish Vikings but either way they're a scandinavian warband looking to cause trouble. 
Theyre designed to be used with the Warhammer Ancient Battles: Shieldwall supplement.

The figures are a combination of warlord games celts and wargames factory ancient germans, celts, vikings and saxons, with one or two gripping beast metal figs. The scale is almost identical between models and they rank up well side by side. Hopefully I'll be adding in some gripping beast saxon thegns in a fierce shieldwall formation, they seem to be very similar in scale too. I wanted some of the celtic and germanic elements in the army as this is meant to represent an early scandinavian army, and be used in games in both Scandinavia, England and Europe. Its a toss up between the ordered saxons or the slightly more unpredicatble and chaotic vikings. ATM the saxons are winning in my mind but heyho.

Originally they were a welsh celtic warband for the Age of Arthur supplement, but the total lack of armour in the army was driving me crazy and as my own beard grew thick and untamed I felt the call of the vikings. I'd like to think ive modelled them in such a way that I can still field a large amount of my army as a celtic force if it was required.

My army is made up of:
a general on foot (gripping beast king penda)
a army standard bearer on foot (gripping beast king penda's banner)
a pagan priest/ druid (radagast the brown from the GW LotR range)

That's it for characters at the moment but i intend to be adding a few more in soon.

62 infantry in light armour with a mixture of hand weapons, shields, spears and double handed axes
92 infantry in cloth (no amrour) with a mixture of hand weapons, shields and spears
16 skirmishing archers on round bases in war of the ring movement trays
16 skirmishing slingers (if playing certain armies) on round bases in war of the ring movement trays
14 skirmishing javelin throwers on round bases in war of the ring movement trays

The entire army is mounted on Renedra bases, a mixture of 20mm x 20mm squares, 20mm x 100mm strips and for skirmishers 25mm round bases. 

Basing materials supplied by Famous Gaming, check them out!

I still have about 40 unarmoured infantry to make into bondi & thralls or ceorls & geburs, bringing the total to at least 240 men. Not a bad start!



Characters- usually mixed into the army units, Penda and Radagast in a large chunk of Thegns or Huscarls works nicely!


Half the army...


... and the other half


And from above!

Time for some much needed painting!